Kawasaki Zzr 1400 2014

You're viewing All Products for Kawasaki - ZZR1400 (ZX-14) Showing 1-50 of 155 results

Crash Protectors - Aero StyleCP0311BL, CP0311WH

Our industry leading crash protectors are now available for the Kawasaki ZZR1400 ('12- onwards).

Requiring no modification to the bike to install, they simply bolt into existing engine mounts on the side of the frame replacing existing engine bolts with our own specially formulated bolts.

R&G Aero Bobbins from R&G - the market leaders in crash protection and the only insurance-approved crash protectors on the market. As used by some of the world's top race teams, what better e...

R&G Stainless Steel Bar Ends for Kawasaki Versys 1000 '12-'18, Z1000, ZZR1400, GTR1400, Ninja 125 '19-, Ninja 1000SX '20- & Royal Enfield Himalayan '17-BE0134SS

Our all-new Stainless Steel Bar Ends have been specially developed and shaped for your bike - slightly heavier than the original bar ends, for less vibration.

The stainless steel finish with lasered R&G logo gives you the ultimate corrosion protection, whilst looking great and helping to protect those expensive levers and clip-ons from damage in the event of a drop or crash.

Designed for the R&G Stainless Steel Bar Ends for Kawasaki Versys 1000 '12-'18, Z1000, ZZR1400, GTR1400,...

Titanium Sprocket Nuts M10X1.25 (5-piece set)RGN01

This 5-piece set of R&G Titanium Sprocket Nuts are made from grade 5 - 6AL-4V - 1068 MPA titanium, meaning they offer extraordinary strength and weight reduction. Our Black Titanium Sprocket Nuts go through a PVD (physical vapour deposition) treatment, ensuring longevity and corrosion resistance.

• Only use Manufacturer torque settings, between 33 - 45nm.
• Kits are offered as bike-specific fitments. If you have a variation of a standard model you may require an alternative kit. ...

Licence Plate Extension/Adapter KitLPK0003BK

Universal Licence plate adapters to suit different number plates hole widths, once installed enable a certain amount of flexibility when fitting the a number plate, replacing the need to redrill your number plate.

Available in a one size fits all.

Supplied in pairs.

NO TAIL TIDY BRACKET IS SUPPLIED WITH THIS KIT

Tail TidyLP0037BK

This Tail Tidy is suitable for the Kawasaki ZZR1400 (ZX-14).

Radiator Guards for Kawasaki GTR1400 '07- and the Kawasaki ZZR1400 '06-RAD0183BK, RAD0183TI

Available in black or titanium powder coat finishes, this Radiator guard fits both the Kawasaki GTR1400 '07- and the Kawasaki ZZR1400 '06-.

Made from pressed aluminium and feature a neat, seamless frame (where applicable). They improve the looks of your bike and help to protect your expensive and vulnerable radiator from flying debris.

Downpipe Grille for Kawasaki ZZR1400 (ZX-14) ('06-'19)DG0007BK, DG0007TI

R&G downpipe grille is made from aluminium, improve looks and protects your expensive and vulnerable downpipes from flying debris and damage.

The product is compatible with the Kawasaki ZZR1400 (ZX-14) ('06-'19)

Available in 'Black' or 'Titanium' Finish.

Titanium Radiator Guard Universal Mesh (16inches x 12inches)RADUMRACINGTI

Available in a 16"x 12" sheet, this R&G Titanium universal mesh is both lightweight and super strong, thanks to its real Titanium (ASTM B265 Grade 1) mesh construction.

Made from the same high quality mesh found on in our Titanium radiator and oil cooler guards, it improves the looks of your bike and help to protect your expensive and vulnerable radiator and other components from flying road debris.

No permanent modifications need to be made to the bike.

Supplied with...

Bar End Sliders for Renthal, LSL Bars, Ducati 848/Diavel, Monster 1200 & S '14-, KTM RC125/200 '14-BE0023BK

Protect your bars with our great little bar end sliders/protectors. Suitable for Renthal bars, LSL bars, Ducati 848 '08- / Ducati Diavel (2011-), Monster 1200 & S '14-, KTM RC125/200 '14-

Please Note, if fitting to a bike with closed ended grips, Modification will be required to install these bar ends.

Bar End Sliders for Kawasaki Versys 1000 '12-'18, Z1000, ZZR1400, GTR1400, Ninja 125 '19-, Ninja 1000SX '20- & Royal Enfield Himalayan '17-BE0032BK

R&G Bar End Sliders are suitable for the Kawasaki Versys 1000 '12-'18, Z1000 '10-, ZZR1400 (ZX-14), GTR1400 (Concours), ZX7-R, Ninja 125 ('19-), Ninja 1000SX ('20-) & Royal Enfield Himalayan '17-.

Helping protect those critical components installed onto the handlebar/clip on from damage in the event of a crash, slide or drop.

Kaoko Throttle Stabilizer for Kawasaki ZX-12, ZX-14, F1400 GTR ('13-), GTR 1400 Concours, 650 R, ER-6N/F(-'15), VERSYS, KLE 650, ER-5F, ZZR1400, KLR650 (08-15), ZX-14 (11-), GTR1400 ('11-'15) (with heated or non-heated grips) KA-KAW200

Kaoko Throttle Stabilizer for Kawasaki ZX-12, ZX-14, F1400 GTR ('13-), GTR 1400 Concours, 650 R, ER-6N/F(-'15), VERSYS, KLE 650, ER-5F, ZZR1400, KLR650 (08-15), ZX-14 (11-), GTR1400 ('11-'15) (with heated or non-heated grips), Versys 1000 '12 - with Kawasaki Handguards.

Kaoko Throttle Stabilizer for Multiple Kawasakis, please see descriptionKA-KAW221

Kaoko Throttle Stabilizer for ZX-12, ZX-14 (-2012), ZX-14R (2013-2017), F1400 GTR (2013-), GTR 1400 Concours, 650 R, ER-6N, ER-6F (-2015), KLE 650, ER-5F, ZZR1400/SE (all models), KLR650 (2008-2015), GTR1400 (2011-2015) (with heated or non-heated grips), Ninja 650L, KLR650 ABS (-2014), Vulcan S ABS (2015-2017), VERSYS 1000 (2012-2017), Z900 (2017), ZR900 (2017) Ninja 250 (2018) Z400 (2019-), Z250 (2019-)

Kaoko Throttle Stabilizer for Kawasaki, ER6N, ER6F, ER5F, Ninja 650R/L, Versys 650 / LT & Versys 1000 / LT , KLR650E/ABS (-2016), ZX12 , ZX14(-2012), ZZR1400(-2012), GTR1400 / Concours (all year models); 650 Vulcan S (2014-) (with Barkbusters HandguKA-KBB300

Kaoko Throttle Stabilizer for the Kawasaki, ER6N, ER6F, ER5F, Ninja 650R/L, Versys 650 / LT & Versys 1000 / LT , KLR650E/ABS (-2016), ZX12 , ZX14(-2012), ZZR1400(-2012), GTR1400 / Concours (all year models); 650 Vulcan S (2014-) (for use with Barkbusters VPS & Storm Plastics).

Kaoko Throttle Stabilizer for Multiple Kawasakis, please see descriptionKA-KAW221R&G

Motorcycle Heated Grips (for 22mm / 7/8-inch handlebars/ clipons)HG000122C

Awarded RiDE magazine Best buy award status.

R&G Heated grips add months to your motorcycling season and comfort to almost any ride, with easy to install electronics wiring and 5 heat setting adjustments you can optimize the heat output to suit your needs.

Fitting 22mm (7/8 inch) diameter handlebars/clipons and are 124mm (4.9inches) in length long (the most common grip size for sportbikes, enduros, and scooters). In only 2 minutes the grips heat up to 35°C (95°F) and on those r...

Premium Motorcycle Heated Grips (for 22mm / 7/8-inch handlebars/ clipons)HGMCPREM

R&G Premium Heated grips add months to your motorcycling season and comfort to almost any ride, with easy to install electronics wiring and 5 heat setting adjustments you can optimize the heat output to suit your needs.

All new Premium Features:
-Heat Setting Memory
-Auto Cut-Out
-Fully Waterproof
-New Grip Design

Fitting 22mm (7/8 inch) diameter handlebars/clipons and are 124mm (4.9inches) in length long (the most common grip size for sportbikes, enduros, and...

Heated Grip GlueGG0001

Eliminate that annoying spinning grip by getting a tube of grip glue. Holds grips firmly in place. Helps to reduce arm pump caused by trying to hold spinning grips in place.

Ideally suited to be used when installed R&G Heated Grips.

Visorcat Wash/ Wipe System with sponge and 50ml bottle VC001

Improve your vision, confidence and safety all year round while you ride!

This ground-breaking product enables you to WASH your visor while on the bike.

Unique wash/wipe action that's incredibly easy to use: 1. Fill the tank with Visorcat wash (supplied). 2. Wash by moving Visorcat across your visor one way. 3. Wipe the residue away by moving Visorcat across your visor in the other direction. The result is 100% clear vision in all conditions. Keep the sponge clean by rinsing i...

Dashboard Screen Protector Kit for Kawasaki ZZR1400 '12-DSP-KAW-006CL

The all-new R&G Second Skin Dashboard Protection kit is made from high quality, anti-scratch material. This bespoke screen protector kit has been designed to protect the delicate dashboard screen on your bike from unwanted scratches and marks.

Kit includes detailed instructions to aid in the dashboard protector placement, 2x dashboard protectors (1x spare), mini spray bottle, suede polishing cloth, wet & dry wipe, squeegee and dust removal strip.

R&G Second Skin for Kawasaki ZZR1400 '12-SCPKAW008

R&G Second Skin stone chip protection film is a non-yellowing (UV Stable), ultra-tough, easy-to-apply, polyurethane protective film. Designed to protect your road or track motorcycle from stone chips, road salt, tar, abrasions, fairing stress fractures and bodywork/fuel tank scratches from general use. The unique properties of our protection film enable it to disperse the impact energy of gravel and small stones, bouncing them off and leaving your bodywork untouched beneath.

R&G Brake Lever Guard for Kawasaki Z400/ Z250 '19- / Ninja 250/400 '18- / Z125 '19- / Ninja 125 '19-/ Ninja 1000SX '20-/ Z900 '20-/ ZH2 '20- / Z900RS '21-/ Z650RS '21-BLG0019

Our all-new version R&G Brake Lever Guard kit can be fitted to the brake side and has been specifically designed for the Kawasaki Z400, Z250 '19-, Ninja 250/400 '18-, Z125 '19-, Ninja 125 '19-, Ninja 1000SX '20-, Z900 '20-, Z900RS '21- & ZH2 '20-, Z650RS '21- models.

Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, MotoAmerica, FIM) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the f...

Carbon Fibre Lever Guard for Kawasaki Z400/ Z250 '19- / Ninja 125 '19- / Z125 '19- / Ninja 250 '18- / Ninja 400 '18-/ ZZR1400 '12-/ Ninja 1000SX '20-/ Z900 '20-/ ZH2 '20-/ Z650RS '21-LG0019C

This Carbon Fibre Lever Guard kit has been specifically designed for the Kawasaki Z400, Z250 '19-, Ninja 125 '19-, Z125 '19-, Ninja 250 '18-, Ninja 400 '18-, ZZR1400 '12-, Ninja 1000SX '20-, ZH2 '20- and Z900 '20-/ Z650RS '21- models.

Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the accidental engagement of the front brake lever during close wheel to wh...

Moulded Lever Guard for Kawasaki Z400/ Z250 '19- / Ninja 250/400 '18- / Z125 '19- / Ninja 125 '19-/ Ninja 1000SX '20-/ Z900 '20-/ ZH2 '20-/ Z650RS '21-MLG0019

This moulded Lever Guard kit can be fitted to either the brake or clutch sides and has been specifically designed for the Kawasaki Z400, Z250 '19-, Ninja 250/400 '18-, Z125 '19-, Ninja 125 '19-, Ninja 1000SX '20-, Z900 '20- & ZH2 '20-/ Z650RS '21- models and is available in a range of colour options.

Originally conceived in Moto2 but now adopted by almost every motorcycle body worldwide (ACU, MSVR, FIM, AMA) and required for racing, the 'Lever Guard' was developed to help avoid the acci...

Cotton ReelsCR0007BK, CR0007WH

These cotton reels are suitable for a range of Kawasaki models. Click 'more info' to view more specific details.

Please note: This Cotton reel is NOT suitable for ZX6R '09-'11 with standard (OE) exhaust - please see #CR0024BK - Offset Cotton Reel. This Cotton Reel is also NOT compatible with the ZZR1400 with standard (OE) exhausts - We recommend our ITB0003 Elevation Series Paddock Stand bobbins

R&G Tank Traction Grip for Kawasaki ZZR1400 '12-EZRG423BL

These R&G Tank Traction Grips have been specially designed for the Kawasaki ZZR1400 '12-.

R&G Tank Traction Grips kits are available for many different bike styles and brands, with new applications released regularly. The unique R&G Tank Traction Grips texture was specifically designed to be both soft and durable, providing the rider with the grip and feel he/she needs to assist in better bike control, enabling the rider to maintain a stable body position while cornering and braking.

R&G Boot Guard Kit for Kawasaki ZZR1400 '12-EZBG402BL

This Boot Guard kit has been specially designed for the Kawasaki ZZR1400 '12-.

R&G Boot Guard kits are available for a large range of bike styles and brands, with new applications released regularly. The unique R&G texture was specifically designed to be durable, providing the rider with a buffer between his boot on the exposed areas of the swingarm which can (on occasion) come into contact with each other during cornering causing wear and unwanted damage to the swingarm or boots (both ...

Shocktube ®SHOCK1BK

Completely enclosing the motorcycle's rear shock absorber and spring, Shocktube® prevents damage from road salt, water spray, stone chipping, dust and dirt.

Patent No: GB2459728

Measure your own Shocktube ®Measure Your Own

The Shocktube® is a high-impact, waterproof, vented tube, made from top quality, bonded 100% CR Neoprene™ which is double lined with stretch nylon on both sides.
Completely enclosing the motorcycle's rear shock absorber and spring, Shocktube® prevents damage from road salt, water spray, stone chipping, dust and dirt.
The Shocktube® can be fitted to most motorcycles with either monoshock or twin shock systems quickly, without the need to remove the shock absorber!
It continually prote...

£21.24ex. VAT

Full Details

- Dont forget to include your shock measurements in the email! -

Exhaust Protector (Yoshimura R-77)EP0011BK

Should you drop or crash your bike, your end can is likely to be scraped - how ever when an R&G exhaust protector is correctly placed on the exhaust the damage to your exhaust is likely to be greatly reduced.

A large shock absorbing rubber under the protector casing and large enveloped jubilee clip ensure the exhaust protector stays exactly where it should and doesn't damage the exhaust during installation and throughout its life.

Suitable for the Yoshimura R-77 exhaust.
...

Exhaust Protector (Scorpion Serket Exhaust)EP0012BK

Made in the U.K.

Headlight Shields for Kawasaki ZZR1400 '12- (Pair)HLS0100CL

These R&G Headlight Shields are specially designed to fit Kawasaki ZZR1400 '12- models. (PAIR)

R&G Headlight shields are engineered for protection and style. Protecting your expensive headlights from debris kicked up from the road, our headlight shields are easy to fit, with no modification needed to your bike and they are easily removed for cleaning. R&G Headlight Shields are made from clear acrylic and specially designed to fit a range of bikes that's ever growing.

R&G Micro LED Indicators RG374BK

R&G LED Micro Indicators (turn signals) can be used on the front or rear of the bike.

If you are fitting these indicators to an R&G Tail Tidy then you may need R&G indicator adaptors.

In some cases, after fitting these indicators, you may find that they flash too fast or too slow. To stop this, R&G Resistors can be fitted - product code RGR0002 (see related products below) - in some cases more than one resister must be used inline.

Supplied as a pair

R&G LED Flasher Relay : OEM block for most Honda, Kawasaki & YamahaRGRELAY003

The all-new R&G LED Flasher Relay has been designed to fix flash rate problems on indicators for the following manufacturers: Honda, Kawasaki & Yamaha.

Please check the existing Indicator Relay where possible before ordering - if you are still unsure please ask your local dealer.

Micro Indicators - LED Type - Aero StyleRG372BK, RG372SI

R&G LED Aero Micro Indicators (turn signals) are designed to replicate the shape of our iconic Aero Crash Protector bobbins and can be fitted to the front or rear of your motorbike. Sold in pairs, they come with clear lenses and illuminate on the side for additional visibility.

Available in two colour options: Black or Silver.

Can be used on the front or rear of the bike.

If you are fitting these indicators to an R&G Tail Tidy then you may need R&G indicator adaptors. ...

Micro Indicators - Resistors for Bulb indicatorsRGR0001

Are your micro / mini indicators flashing incorrectly?In many cases, after fitting micro / mini indicators, you will find that the indicators flash too fast or too slow. To stop this, R&G Resistors can be fitted which should solve the problem.

** Supplied as a pair **

These resistors are for the R&G Bulb Indicators. If you have R&G LED indicators, please use RGR0002

Toe Chain Guards - Road Racing Toe GuardTG0005BK

R&G Racing's new, road-racing inspired toe guard has been developed in conjunction with roads hero Ryan Farquhar. Made from lightweight, high-density polyethylene, it features slots for improved positioning and a longer-than-usual kickback, in order to ensure adequate coverage of the sprocket in cases of running a long wheelbase - a typical feature of road racing.

Toe Chain Guards - ABS Shark's FinTG0001BK, TG0001CL

These toe/chain guards are made from ABS Plastic. They look good, can be fitted in less than five minutes and are available in black or carbon look.

Top Yoke Cap for Kawasaki Ninja H2 SX '18- & ZZR1400 '19-YTI0013BK

This yoke plug insert is suitable for the Kawasaki Ninja H2 SX '18- & ZZR1400 '19-

A "must have" to give that Stem Nut of yours a finished look. Covering the stock Yoke Stem Nut and securing in place thanks to its ribbed design ensures a tight fit that won't fall out or move.

Finished in Black.

Sold as a single.

Frame PlugFI0043BK

This frame insert is suitable for the Kawasaki ZZR1400 (2012 onward) utilizing a steel bar (much like our fork protector kits) to keep the both the left and right hand sides in place on the bike they cover exposed holes in the frame protecting the frame from damage and debris buildup.

Sold as a pair

Frame PlugFI0009BK

This frame plug is suitable for the Kawasaki ZX10-R '06-'15, Z1000 2010, Z1000SX ('11-'19), Versys 1000 ('12-) and Ninja 1000SX '20-, it fits the left-hand side of the bike.

Fender Extender for Kawasaki GTR1400 '07- and ZZR1400 '06-FERG0156

This R&G Fender Extender is compatible with the Kawasaki GTR1400 '07- and ZZR1400 '06- models.

R&G Fender Extenders offer additional protection to front-mounted coolers, downpipes and fairing panels from debris, road grit, mud and water kicked up by the front wheel. Attaching to the motorcycle's front mud guard / fender via included adhesive strips and push rivets, installation takes only minutes.

R&G Gleam Chain Cleaner 500ml RGGLEAM10

R&G Chain Cleaner quickly removes all containments from your chain. Our formula breaks down even the toughest grime for easy, stress-free cleaning. For added cleaning power, consider using a brush to agitate contaminants before rinsing.

Kawasaki Zzr 1400 2014

Source: https://www.rg-racing.com/browsebike/Kawasaki/ZZR1400_%28ZX-14%29/

Kawasaki Zzr 1400 2014